Skip to content
← All practicals

Physics practical

I–V characteristic of a filament lamp

Build the circuit, set the voltage with a rheostat, read analogue meters, and plot the curve that shows the filament’s resistance rising as it heats.

What you will do

  1. 01Put the ammeter in the gap in series with the lamp and the voltmeter across the lamp, + to +.
  2. 02Choose the most sensitive terminals that keep each needle on the scale.
  3. 03Close the switch, set the rheostat, and read both meters once the needles are steady.
  4. 04Take at least six pairs of readings, starting at 0.5 V or less and going up to at least 2.0 V.
  5. 05Calculate R = V / I for each pair.
  6. 06Plot I against V, draw a smooth curve through the origin, and use it to find the current and the resistance at 1.50 V.